Why use Ekki timber?

Ekki is one of the main species of timber that we sell here at EcoChoice.

Also known as Azobe or Bongossi (or by its Latin name, Lophira Alata), it is a tropical hardwood that mainly grows in the swamps and rainforests on the cost of West Africa, in countries such as Sierra Leone, Nigeria and Cameroon.

The tree itself grows to be quite large, about 100-150 feet tall (between 30 and 46m), and the diameter of the trunk is around 5-6 feet (1.5-1.8 metres), so is generally available in large sizes.

Appearance
Ekki is also sometimes called Red Ironwood, due to it being an extremely strong species of timber, and because of its red colour, which you can clearly see in the photo with this article. The sapwood is more of a pink colour, whereas the heartwood is a dark red or violet brown. Apart from the colour of the wood, it is also quite recognisable for having a speckled appearance, as the pores contain light-coloured (white and yellow) mineral deposits which make streaks throughout the wood.

Strength and Durability
Ekki is well known for being incredibly strong (strength class D70), heavy, hard and naturally durable (durability class 1), rather than for any aesthetically pleasing properties. In fact, it is generally considered to be the most durable of all African woods. It weighs on average 65 pounds per cubic foot – which means it is part of a very small group of timber species which will sink in water. In comparison, oak has an average weight of 47 pounds per cubic foot. Its grains are interlocked rather than all aligned in the same direction, which make it incredibly hard to split, making it a perfect option for fenders in rivers, canals, docks and harbours.

It is naturally resistant to both insect and fungal attack, and to weathering, meaning that you don’t have to use toxic chemicals to protect it, and it is known for having a good finishing surface.

Downsides of using Ekki
The only downsides that are often mentioned to Ekki is that it can be difficult to work because it is so strong and hard, and that it takes a long time to dry, so it can distort in the process. It is particularly difficult to work if just using hand tools, but it can be worked by sharp tools and good quality machines, although it needs to be pre-drilled before nailing. The fact that it is so long lasting and durable mean that it is worth the effort involved to work it.

Uses of Ekki
Because it is so strong, hard and durable, Ekki is quite often the timber of choice for heavy construction projects and for marine projects. In particular, it is ideal for using to build bridges, decking, piling, fenders and lock gates. It is also often used for flooring, with its durability making it ideal for areas where the flooring gets a great deal of footfall such as large ship decks. It is also ideal for other uses in construction where heavy, durable timber is required, and for railway sleepers.

Sustainability
Ekki is considered to be a vulnerable tree because it has been exploited over the last three generations. As we noted earlier in the article, it grows in developing countries in West Africa where there has been a history of deforestation. Illegal deforestation often goes hand in hand with corrupt practices, human rights abuses, hunting endangered animals and the destruction of habitats. Because of this, it is particularly important to source Ekki timber from independently certified sustainable sources, such as FSC certified forests.

FSC stands for Forest Stewardship Council. The FSC is an independent, not for profit organisation that exists in order to promote responsible management of the world’s rainforests. In other words, they ensure that the wood they certify comes from sustainably managed forests, not from illegal logging. The FSC certification system is recognised around the world.

All of the tropical hardwood timber that we use is sustainable and comes from FSC sources. You may be thinking that all this does is do less damage to the forest than illegal deforestation does, and that is a common misunderstanding, but sourcing timber for an FSC forest doesn’t just do less damage to the forest, it actually helps the forest.

The FSC selects and cuts trees in a way that respects the forest and ensures that the forest is there for future generations. They make sure that no damage is done to the environment, people and the wildlife that live in it, and the purchasing of FSC certified timber helps the FSC forests to remain economically viable and allows the FSC to continue protecting them.

Interesting Fact
Sniffing the bark of the Ekki tree is used as a traditional method of treating headaches, so even though this is a species of timber not to be sniffed at, at the same time is a type of tree to quite literally be sniffed at!

Who are EcoChoice?
EcoChoice are specialist suppliers of certified timber and recycled plastic products for exterior works: from cladding and decking to piers and footbridges. We were formed in 2005 with the aim of promoting FSC certified timbers to the UK construction industry, helping customers to engage in a sustainable way instead of turning away from both the deforestation and plastic waste problems. In addition to Ekki, we also offer products from a wide range of other different timber species.

We are passionate about supplying our clients with independently certified timber products while encouraging responsible and sustainable practices at the source level. To find out how we can help you and to get a quick, no-obligation quote, please call us on 0345 638 1340, email us on info@ecochoice.co.uk or for more information about our sustainable timber products, please visit our website https://ecochoice.co.uk/

Why use ekki timber

Ask Joe! Expert industry advice

Unsure which timer is best for your project?

Our timber experts have years of experience and will be able to match the perfect species to your project, as well as provide a quote for sustainable timber at highly competitive prices.

Frequently asked questions

Do you supply timber for domestic uses?

Yes, we supply timber for domestic applications as well as commercial and public constructions. From garden decking to shed cladding, we will be happy to supply smaller deliveries for home use.

Is your timber FSC-certified?

Yes, all timber we supply is FSC or PEFC certified and sourced from independently verified responsibly managed forests. If we can’t find your request in FSC/PEFC certified timber we’ll suggest an alternative that is certified or clearly note that the offer is minimum EUTR.

Where does EcoChoice deliver to?

EcoChoice delivers to construction sites, warehouses and homes across the UK, as long as there’s access and unloading for our trucks.

What are the best timber species for exterior use?

There are many different timber species suitable for exterior use and which is the best for your project depends on your requirements. In general, though, we recommend EkkiGreenheartOpepe and Oak for heavier civil/marine uses. For intermediary external use such as decking, where the timber needs to be both strong and durable but not on the same level as civil engineering (bridgespiling, etc) we usually supply CumaruIpe, Jatoba, and Balau. And for the lighter exterior use where the timber is non-structural such as cladding, we deliver CedarLarchThermowood and others.

Which timber is the most durable?

Durability Class 1 timbers are the most durable. This of course depends on the use (hazard) class they’ll be in service for. For direct ground and water contact such as sleepers, fenders, marine piling, etc, Ekki and Greenheart are known to be the most durable timbers available. For decking and cladding where there’s no direct ground contact (use class 3) there’s a much wider range of timbers such Larch, Cedar, Thermo modified Pine or Ash and others.

What’s the best timber for internal cladding?

Internal cladding, where your timber is not in ground and not exposed to the elements can be classed as either use-class 1 or 2 – in which case most timbers will meet this durability criteria. That is not to say they’ll be the best, since internal environments have lower humidity (moisture) levels than outside. So in these cases, it’s best to go for a kiln-dried timber cladding board as these are more stable and delivered already in lower MC (moisture content) than the usual fresh sawn timbers sent to external applications. A word of caution – as timber reacts to variations in moisture, it’s best to avoid cladding any areas inside your bathroom.

How can I make decking less slippery?

The first thing is to ensure your deck boards are kept clean from leaves and other debris which will, over time, cover the surface and make it more slippery. Grooved boards can be used to improve grip if installed and used perpendicular to traffic, so especially useful in narrow passages and footbridges. Lastly, you can add our Grip-Choice strips: these are a mix of epoxy with aggregates that add gripping ridges to your deck area. Gripchoice is an easy way to make decking less slippery and safer, especially over large areas or where there’s high traffic. We can pre-install Grip-Choice strips for your decking before delivery or ship the strips separately to add to your existing deck’s grooves as a retro-fit solution.

What wood machining services do you offer?

We can offer planing, sawing, drilling and profiling of rough-sawn wood to any profile you require: from handrails to large port fenders.

Can you supply pre-drilled timber?

Yes, we will be happy to provide pre-drilled timber which is tailored to your needs for quick installation, thus saving you valuable time on site.

What cladding profiles do you supply?

We provide a wide range of cladding profiles, including tongue and groove, featheredge and shiplap. You can check the standard profiles here – but we can also match or custom make profiles to suit your specific needs.

Does timber change colour?

Yes, timber is well-known for changing colour over time. Some species can darken quickly right after installation, and like most untreated wood will eventually weather to a beautiful silver-grey. Interior timber is less likely to change colour (depending on conditions), and timber can be stained, painted or treated with UV-resistant oils to reduce colour change.

Do I need to treat exterior timber?

Some timbers such as Oak and Ekki, can withstand the strains of exterior use without any treatment. However, to extend the lifespan and maintain the aesthetic of your wood, we do recommend treating your timber with stains and oils. Pre-treated timber, such as ThermoWood and OrganoWood, are low-maintenance options which are more durable, but can have their life service extended by applying a clean and stain maintenance schedule.

Do I need to treat interior timber?

Depends on what area the timber is being used. For floor joists and timber rafters, it is common to see timber treated, or least very well kiln-dried. Other uses such as flooring may benefit from varnishing while internal timber cladding for decorative purposes shouldn’t require any treatment other than if you want to change its colour with different types of stains or oils.

Where are you based?

We’re based in Cambridge, UK, and coordinate multiple sawmills all over the world to manufacture your order. We then organise delivery with a range of hauliers so that your orders gets to your site on time.

What are the usual decking sizes?

Timber decking is usually 21x140mm or similar. For heavier applications where there’s more load and traffic, we deliver 35 or 45mm thick boards (such as Hastings Pier). Narrower boards are also possible: 95-90mm is a standard width – but we can manufacture whatever size you require.

What are the usual cladding sizes?

Typical cladding section sizes are 18×95 and 18x145mm although we can always custom make a section to suit your project’s design requirements. That includes waney edge boards in Oak or Chestnut as well as extra wide 195mm boards.

Trusted by

What our customers say about us

Good quality, great service, fast delivery!

5

Marinella Li

Always helpful! One of our valued TDCA DeckMark and CladMark accredited supplier members which means their quality procedures are routinely audited and stand up to scrutiny giving you extra peace of mind.

5

Janet Sycamore

Having needed the supply of cladding, decking boards and other specified timbers through out the year Eco choice have been very helpful in sourcing the specified timbers and quantities required at a very competitive price.

5

Tim Saunders

Great quality, service and price. A pleasure to deal with. I would highly recommend Eco Choice.

5

Emma Hurrell

Fantastic company- Mike and the team are the best in the business- worked with them for many years.

5

Prem Raja

Always reliable and quality products, easy to deal with company.

5

Stone Zone

4.9

Average rating on Google Reviews

  • 9 years ago

Wonderful guys!

Nicola Edmead

  • 9 years ago

Experts in Timber, Nationwide delivery

Joe Middleton

  • 6 years ago

Fantastic company- Mike and the team are the best in the business- worked with them for many years.

Prem Raja

  • 6 years ago

Always reliable and quality products, easy to deal with company.

Stone Zone

Your enquiry

This field is for validation purposes and should be left unchanged.
Name(Required)

Contact us today

Opening hours

Mondays: 09:00 – 17:00
Tuesdays: 09:00 – 17:00
Wednesdays: 09:00 – 17:00
Thursdays: 09:00 – 17:00
Fridays: 09:00 – 16:00
Saturdays: Closed
Sundays: Closed