Mandioqueira

Yes, we supply timber for domestic applications as well as commercial and public constructions. From garden decking to shed cladding, we will be happy to supply smaller deliveries for home use.

Yes, all timber we supply is FSC or PEFC certified and sourced from independently verified responsibly managed forests. If we can’t find your request in FSC/PEFC certified timber we’ll suggest an alternative that is certified or clearly note that the offer is minimum EUTR.

EcoChoice delivers to construction sites, warehouses and homes across the UK, as long as there’s access and unloading for our trucks.

There are many different timber species suitable for exterior use and which is the best for your project depends on your requirements. In general, though, we recommend Ekki, Greenheart, Opepe and Oak for heavier civil/marine uses. For intermediary external use such as decking, where the timber needs to be both strong and durable but not on the same level as civil engineering (bridges, piling, etc) we usually supply Cumaru, Ipe, Jatoba, and Balau. And for the lighter exterior use where the timber is non-structural such as cladding, we deliver Cedar, Larch, Thermowood and others.

Durability Class 1 timbers are the most durable. This of course depends on the use (hazard) class they’ll be in service for. For direct ground and water contact such as sleepers, fenders, marine piling, etc, Ekki and Greenheart are known to be the most durable timbers available. For decking and cladding where there’s no direct ground contact (use class 3) there’s a much wider range of timbers such Larch, Cedar, Thermo modified Pine or Ash and others.

Internal cladding, where your timber is not in ground and not exposed to the elements can be classed as either use-class 1 or 2 – in which case most timbers will meet this durability criteria. That is not to say they’ll be the best, since internal environments have lower humidity (moisture) levels than outside. So in these cases, it’s best to go for a kiln-dried timber cladding board as these are more stable and delivered already in lower MC (moisture content) than the usual fresh sawn timbers sent to external applications. A word of caution – as timber reacts to variations in moisture, it’s best to avoid cladding any areas inside your bathroom.

The first thing is to ensure your deck boards are kept clean from leaves and other debris which will, over time, cover the surface and make it more slippery. Grooved boards can be used to improve grip if installed and used perpendicular to traffic, so especially useful in narrow passages and footbridges. Lastly, you can add our Grip-Choice strips: these are a mix of epoxy with aggregates that add gripping ridges to your deck area. Gripchoice is an easy way to make decking less slippery and safer, especially over large areas or where there’s high traffic. We can pre-install Grip-Choice strips for your decking before delivery or ship the strips separately to add to your existing deck’s grooves as a retro-fit solution.

We can offer planing, sawing, drilling and profiling of rough-sawn wood to any profile you require: from handrails to large port fenders.

Yes, we will be happy to provide pre-drilled timber which is tailored to your needs for quick installation, thus saving you valuable time on site.

We provide a wide range of cladding profiles, including tongue and groove, featheredge and shiplap. You can check the standard profiles here – but we can also match or custom make profiles to suit your specific needs.

Yes, timber is well-known for changing colour over time. Some species can darken quickly right after installation, and like most untreated wood will eventually weather to a beautiful silver-grey. Interior timber is less likely to change colour (depending on conditions), and timber can be stained, painted or treated with UV-resistant oils to reduce colour change.

Some timbers such as Oak and Ekki, can withstand the strains of exterior use without any treatment. However, to extend the lifespan and maintain the aesthetic of your wood, we do recommend treating your timber with stains and oils. Pre-treated timber, such as ThermoWood and OrganoWood, are low-maintenance options which are more durable, but can have their life service extended by applying a clean and stain maintenance schedule.

Depends on what area the timber is being used. For floor joists and timber rafters, it is common to see timber treated, or least very well kiln-dried. Other uses such as flooring may benefit from varnishing while internal timber cladding for decorative purposes shouldn’t require any treatment other than if you want to change its colour with different types of stains or oils.

We’re based in Cambridge, UK, and coordinate multiple sawmills all over the world to manufacture your order. We then organise delivery with a range of hauliers so that your orders gets to your site on time.

Timber decking is usually 21x140mm or similar. For heavier applications where there’s more load and traffic, we deliver 35 or 45mm thick boards (such as Hastings Pier). Narrower boards are also possible: 95-90mm is a standard width – but we can manufacture whatever size you require.

Typical cladding section sizes are 18×95 and 18x145mm although we can always custom make a section to suit your project’s design requirements. That includes waney edge boards in Oak or Chestnut as well as extra wide 195mm boards.